What can I do if my curtains are too long?

Creative Ways to Shorten Long Curtains

1. Tieback and Blouse. The position of the tiebacks can give long curtains a little lift. …
2. A Little Off the Top. Shorten tab-top or tie-style curtains at least a few inches by turning them into grommet-hung curtains. …
3. Shorten as Pleats or Scarves. …
4. Raise the Rod. …
5. Tier Up.

How can I shorten my curtains without cutting them?
When curtains appear too long, try sewing a hem, which can allow you to shorten curtains without cutting curtains to length so you can retain the fabric if you want to. Another way of shortening curtains is to incorporate a folded design with buttons as fasteners. Folding the curtain hem up creates a double hem.

How do you shorten curtains by hand?

Does it matter if curtains are too long?
It really doesn’t matter if curtains are too long as you can choose their length according to your liking and/or interior design style. You also have the option to shorten the curtains either by sewing, hemming, using tiebacks, or raising the rod, if you find the curtains too long for your home décor.

How do you shorten store bought curtains?

What is the hem allowance for curtains?

The ‘Norm’ if you like, would be to have a 3 inch (7.5cm) hem. However if you are making curtains that are quite large or long, you may find that a 4 inch (10cm) hem gives proportionately better appearance. Or, if your curtains are going to be quite short, hemming them with a 2 inch (5cm) hem would be sufficient.

Frequently Asked Questions(FAQ)

How do you make IKEA curtains shorter?

Instructions:

1. Prewash curtains. If they’re a natural fiber and will shrink in length with washing and drying.
2. Iron or steam curtains. …
3. Hang curtains and measure to just above the floor. …
4. Take curtains down, fold, compare. …
5. Connect the pins. …
6. Iron bottom edge. …
7. Turn under raw/serged edge and measure hem. …
8. Pin in place.

Can you use fabric tape to hem curtains?

Iron-on tape is supplied with all curtains/voile curtains to enable you to create a hem at the desired length. … Place the tape at the bottom of the curtain with the glue side against the wrong side of the fabric. Iron, then remove the protective paper. Turn down the fabric at the desired hem length and iron again.

What is a curtain hem?

Curtain hems are folded twice at the bottom, so you will need twice as much fabric for the hem. This means that you will need to cut your curtains longer than you want them to be. The longer the curtain is, the wider the hem needs to be; this will help make it look more proportionate.

How do you hem without sewing?

Can you cut curtains?

What Stitch do I use to hem curtains?

How do I hem curtains?

How do you make long curtains look good?

make curtains look custom

1. go high. Hanging your curtains higher than the window will help draw your eye up and make the room feel taller and the window visually bigger. …
2. go wide. The total width of your curtain panels should be at least two times the width of your window. …
3. steam your panels!

Is it OK if curtains don’t touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.

Should you puddled curtains?

Moderate Puddle – Drapes with a more substantial amount of fabric gathered on the floor: … This lends towards a more formal look, and drapes that puddle can really help with heating and cooling loss! Opulent Puddle – A large amount of fabric gathered on the floor: A more formal, luxurious feel.

How do you take up ready made curtains?

How do you shorten Ikea curtains without sewing?

The Easiest (No Sew) Way to Hem IKEA Curtains – Fold and Pin Your Curtains. Once your curtains are opened up, take the bottom inch of your curtains and fold it upwards. If you want your fold to stay in place, hit it lightly with your iron.

How long should a curtain hem be?

On a ready made product the bottom hem is usually 2 or 3 inches in width. Custom bottom hems are always 4 and sometimes 5 inches to give a more quality look. The side hems on a ready made curtain are usually 1/2 or 1 inch in width single hems and custom are almost always 1 1/2 inches in width double hems.

What can I use for drapery weights?

Drapery lead weights for indoor use won’t cut it outdoors. You will need something much heavier to defy the wind. You can put a heavy stainless steel link chain through the bottom hem of the curtains. Alternatively, you can sew or hang heavy fish sinkers and washers at the bottom, as well.

How do you use Wonder Web on curtains?

What are curtain lengths?

Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings.

Can you use Wonder Web to hem curtains?

Ideally suited for hemming dresses, skirts, trousers and curtains without the need for sewing, this pack of Wundaweb is available in a 20 metre roll.

How can I fix long curtains without sewing?

Is hem tape permanent?

Fusible hem tape is a double sided fusible adhesive tape that can be used to permanently adhere two layers of fabric together. … While using fusible hem tape is a quick alternative to sewing a hem in place, it is permanent and cannot be removed.

Can you cut curtains with scissors?

Cut Your Curtains Once you have measured your new hem and pinned it out, cut off the excess curtain using fabric scissors by following the pinned line.