What is the cam follower used for?

The Cam Follower is a compact and highly rigid bearing with a shaft. It contains needle rollers and is used as a guide roller for cam mechanisms or straight motion. Since its outer ring rotates while keeping direct contact with the mating surface, this product is thick- walled and designed to bear an impact load.

What is an example of a cam follower?

A cam follower is a component that is intrinsically tied to a cam. Cams exist in many applicationsdishwashers, sprinklers, etc. but the most well-known example is that of a camshaft in a car. The goal of a cam is to convert rotary motion to linear motion.

What is an engine cam follower?

A cam follower, also known as a track follower, is a specialized type of roller or needle bearing designed to follow cam lobe profiles.

What is the difference between a cam and a follower?

As nouns the difference between cam and follower is that cam is a turning or sliding piece which imparts motion to a rod, lever or block brought into sliding or rolling contact with it or cam can be (informal) camera while follower is (literally) one who follows, comes after another.

Is a cam follower a lifter?

The cam follower is a cylindrical device that tracks the shape of the cam lobe and reciprocates the movement to the opening and closing of the valves in the combustion chamber. The follower drives a piston that is enclosed in a cylindrical casing. This casing-piston assembly is known as the lifter.

What are track rollers?

Track rollersalso referred to as idler rollersare motion transmission components designed to work with all varieties of tracks. They see use in conveyor systems, cam drives, and a wide range of similar material handling systems.

What are the different types of followers?

In 1988 Robert E. Kelley developed a theory of followers describing five types: Conformist, Passive, Alienated, Exemplary and Pragmatic. Ira Chaleff’s Styles of Followership (2003) proposes four distinct follower types: Resource, Individualist, Implementer and Partner.

How do camshaft followers work?

Cams are used to convert rotary to linear (reciprocating) motion. As the cam rotates, the follower rises and falls in a process known as reciprocating motion. … The follower maintains contact with the cam through the force of gravity or by a spring. The total range of movement produced by the cam is called the stroke.

What are the three types of cam?

Cams

What is stroke of the follower?

Stroke or throw:The greatest distance or angle through which the follower moves or rotates. Follower displacement: The position of the follower from a specific zero or rest position (usually its the position when the f ollower contacts with the base circle of the cam) in relation to time or the rotary angle of the cam.

What is a tappet in an engine?

A tappet is most commonly a component in an internal combustion engine which converts the rotating motion of the camshaft into linear motion of the valves, either directly or indirectly. An earlier use of the term was for part of the valve gear in beam engines beginning in 1715.

How do you use cam followers?

What is mushroom follower?

mushroom follower (flat-foot follower) A type of cam follower with a flat surface. …

What is a knife follower?

[nf ej kam flwr] (design engineering) A cam follower having a sharp narrow edge or point like that of a knife; useful in developing cam profile relationships.

What is an example of a machine that uses the cam and follower?

Cam and follower are widely used for operating inlet and exhaust valve of I C engine. These are used in wall clocks. These are used in the feed mechanism of the automatic lathe Machine.

Which follower is extensively used in aircraft?

knife edge follower.

Which cam is used in IC engine?

camshaft A camshaft on an internal combustion heat engine is a device that controls both the input of fuel and the expulsion of exhaust fumes. It consists of several radial cams, each displacing intake or exhaust valves. This camshaft is connected to the crankshaft via belt, chain or gears.

What is follower and Iscam?

The mechanism is developed by incorporating three members they are, a driver member named Cam, a frame that supports cam and follower, the follower is guided by the frame and lastly, the driven member named as a follower.

What is the purpose of a track roller?

It is a mechanism that allows vehicles to move using tracks. They increase the contact surface of the vehicle with the ground reduce the unit pressure and improve the road passability.

What does a roller bearing do?

A rolling-element bearing, also known as a rolling bearing, is a bearing which carries a load by placing rolling elements (such as balls or rollers) between two bearing rings called races. The relative motion of the races causes the rolling elements to roll with very little rolling resistance and with little sliding.

What is a track roller bearing?

Ball bearing track rollers are self-retaining, single or double-row ball bearings with particularly thick-walled outer rings. … In addition to high radial forces, these bearings can also support axial forces in both directions. The outer rings have a crowned or cylindrical outside surface.

What are 5 types of followers?

Kelley (1992) posited that there are five followership styles. These include exemplary, conformist, passive, alienated and pragmatist styles (Kelley, 1992). These followership styles are based on a combination of two different followership dimensions: engagement and critical thinking (Kelley, 1992).

How many types of cam and follower are there?

It has two types one is concave surface and other is convex surface type. A circumferential cut is made on the periphery of the cam for the rotation of the follower.

What are 3 types of followers?

What are 3 types of followers quizlet?

Where are knife edge follower used?

The Knife Edge Follower: This is the simplest type, is not often used due to the rapid rate of wear. When it is adopted, it is usually for reciprocating motion, running in slides and there is considerable side thrust, this being a component of the thrust from the cam.

What is cam and tappet mechanism?

a mechanism that usually consists of two moving parts (a cam and tappet) and a fixed part (the support). … To reproduce a complex path of motion of the working units, such as in knitting machines, two cams transmit motion to the tappet.

What are the different types of follower motion?

Uniform velocity, Simple harmonic motion, Uniform acceleration and retardation, Cycloidal motion.

What is cam stand for?

Computer-Aided Manufacturing By james nunns 18 Apr 2017. CAM stands for Computer-Aided Manufacturing and referes to the use of software to control machine tools used in manufacturing processes. Enabling faster, accurate and more precise production of components, CAM is usually the next step after computer-aided design (CAD).

How does a cam work?

How does CAM work? … The CAM system works by substituting hand-made jigs with software that defines the actions and processes of a machine directly. Computer-aided manufacturing software translates drawings and data into detailed instructions that drive automated tools/machines.