What is third tubular plate?

One Third Tubular Plate is used as a buttress plate for fibula, metatarsals, and metacarpals bones. The plate holes support 3.5mm cortex and 4.0mm cancellous or cannulated screws. The plate neutralizes any shearing or bending force that could disrupt an unprotected lag screw fixation.

What is tubular plate?

Tubular plates are thin plates with circular holes for bone fixation on both sides of fracture firmly, with the help of screws. It is used for fixation of small bone fragments. Plates fixate fractures of short bones or long (tub) bones, they are for corrections and bone stabilisation.

What is an Antiglide plate?

Antiglide plate fixation is an open reduction internal fixation (ORIF) technique used in oblique diaphyseal fractures of the distal fibular.

What is recon plate?

Reconstruction plates have deep notches on the edge of the plate. These notches are situated between the holes and allow contouring of the plate in all planes. Three plate sizes are available for use with 2.7, 3.5, and 4.5 cortex screws. The holes are oval to allow dynamic compression.

What is lateral malleolus of left fibula?

The knob on the outside of the ankle, the lateral malleolus, is the end of the fibula, the smaller bone in the lower leg. When this part of the bone fractures, or breaks, it’s called a lateral malleolar fracture.

What is locking compression plate?

The locking compression plate is a contemporary implant that allows for both conventional screw placement (using nonlocking screws) and locking screw placement (where screw heads lock into the plate at a predetermined angle). This allows for greater versatility in the application of internal fixation.

What is flat plate battery?

Flat plate batteries are suggested for areas with minimal and frequent power cuts. These batteries are cheap, light on the pocket but have a shorter life span than tubular inverter batteries. These are one of the best inverter batteries with a faster rate of charging and need lesser time to charge.

Read More:  What is the anatomy of the scrotum?

How does dynamic compression plate work?

Dynamic compression principle These holes are shaped like an inclined and transverse cylinder. The screw head slides down the inclined cylinder as it is tightened, the head forcing the plate to move along the bone, thereby compressing the fracture.

What is tibial plafond?

A tibial plafond fracture (also called a tibial pilon fracture) occurs at the end of the shin bone and involves the ankle joint. As is the case with tibial plateau fractures, these injuries occur close to the joint and must be treated with the cartilage surface of the ankle joint in mind.

How do you treat fibula pain?

Ice is used to relieve the pain and reduce swelling. If no surgery is needed, crutches are used for mobility and a brace, cast, or walking boot is recommended while healing takes place. Once the area has healed, individuals can stretch and strengthen weakened joints with the help of a physical therapist.

What are orthopedic plates made of?

The biocompatible materials used for bone plates are: stainless steel (SS), cobalt base alloys, bioceramics, titanium alloys, pure titanium, composite materials, and polymers (non-resorbable and bioresorbable).

What is Champy line?

Champy popularized the treatment of mandible fractures with miniplate fixation along the ideal lines of osteosynthesis. This is a form of load-sharing osteosynthesis to be applied in simple fracture patterns having an acceptable amount of bone stock.

Does lateral malleolus fracture require surgery?

Most lateral malleolus fractures are stable ankle fractures, meaning they TK TK. Surgery is usually not needed. The lateral malleolus is the bone on the outside of the ankle joint. This bone is part of the fibula , one of two bones of the lower leg.

Can you walk on a posterior malleolus fracture?

You may walk on the foot as comfort allows. You will find it easier to walk with crutches in the early stages. If after six weeks you are: still experiencing significant pain and swelling or.

Read More:  What is strontium titanate used for?

How long does it take for a fractured malleolus to heal?

Ankle undisplaced medial malleolus fracture

Healing: This normally takes approximately 6 weeks to heal.
Pain and Swelling: The swelling is often worse at the end of the day and elevating it will help. Pain and swelling can be ongoing for 3-6 months. Take pain killers as prescribed.

Which lock provides better stability?

Locking plate/screw systems have been shown to provide more stable fixation than conventional nonlocking plate/screw systems.

What are cerclage wires?

Cerclage wire refers to a type of orthopedic fixation/stabilization wire placed to approximate fractured bone fragments.

When do you use a lock plate?

The indications for use of locking plates include the following: (1) metaphyseal and intra-articular fractures; (2) highly comminuted fractures, particularly those involving diaphyseal and metaphyseal bone; (3) osteoporotic bone; (4) proximal tibia and distal femur fractures; and (5) periprosthetic fractures.

Which tubular battery is best for inverter?


  1. Exide Inva Master Battery. …
  2. Luminous Inverlast Tubular battery. …
  3. Exide Inverter Plus Battery. …
  4. Atom Battery by Loom Solar. …
  5. Luminous ILTT 18048 Battery. …
  6. Exide 150ah Tubular Battery. …
  7. Luminous Inverlast Battery 150ah/12v. …
  8. Microtek TT 2450 Battery.

How long does tubular battery last?

Flat plate battery life is around 3 years and Tubular battery lifespan is around 3 to 5 years. Within those three years still, it can get damaged very easily.

Does tubular battery need distilled water?

One needs to top-up inverter battery with distilled water only. Normal tap water and RO water should not be used for top-up as they contain dirt and other impurities that can shorten the battery life.

What is LCP in Ortho?

The Locking Compression Plate (LCP) Combining Conventional and Locked Plating Techniques. The combination of conventional compression plating and locked plating techniques enhances plate osteosynthesis.

Read More:  What is a binding isotherm?

What is DCP in orthopedic?

A dynamic compression plate (DCP) is a metallic plate used in orthopedics for internal fixation of bone, typically after fractures. As the name implies, it is designed to exert dynamic pressure between the bone fragments to be transfixed.

What does AO mean in surgery?

In 1958 a group of Swiss general and orthopaedic surgeons established the AO (Arbeitsgemeinschaft für Osteosynthesefragen) or the Association of the Study of Internal Fixation (ASIF) to strive to transform the contemporary treatment of fractures in Switzerland.

What is Orif?

Open reduction and internal fixation (ORIF) is a type of surgery used to stabilize and heal a broken bone. You might need this procedure to treat your broken ankle. Three bones make up the ankle joint. These are the tibia (shinbone), the fibula (the smaller bone in your leg), and the talus (a bone in your foot).

What is Volkmann fragment?

Internal rotation of the foot relative to the leg (PER-Lauge-Hanson) tightens the posterior inferior tibiofibular ligament (PITFL) and may result in an avulsion fracture at the tibial attachment of PITFL [4], which presents as a Volkmann fragment (Figure 1).

How long does a tibia and fibula take to heal?

Recovery from a tibia-fibula fracture typically takes about three to six months. Your child may be able to heal faster by resting and not putting too much weight on their leg until the bone has healed.

Scroll to Top