Just in Case is the most common definition for JIC on Snapchat, WhatsApp, Facebook, Twitter, Instagram, and TikTok. JIC. Definition: Just in Case. What is a female JIC?
Originally named for the now-defunct Joint Industrial Commission (JIC), this connection is very common in fluid power systems. Both the male and female halves of this connection have 37° seats. The seal takes place by establishing a line of contact between the male flare and the female cone seat.
Are JIC and an the same?
JIC fittings are dimensionally identical to AN (Army-Navy) fittings, but are produced to less exacting tolerances and are generally less costly. Should you use thread sealant on hydraulic fittings?
You don’t need or should use any teflon tape or pipe dope on hydraulic fittings. Neither are designed for those kinds of pressures and using them could create a less then perfect mating between connection surfaces causing more harm than good.
Is JIC a Scrabble word?
No, jic is not in the scrabble dictionary. What is an Size?
Plumbing Basics – AN Fittings & Hoses AN stands for Army-Navy. … Each AN size refers to the outer diameter (o.d.) of the tube, or inner diameter (i.d.) of the hose that it’s used with. The numbers assigned equal the size in 1/16 inch increments. Each AN size also has its own standard thread size.
Frequently Asked Questions(FAQ)
How is JIC measured?
What is a JIC swivel?
Parker Triple-Lok JIC tube fitting design is simple. The tube end is flared at a mating 37 degree angle and sandwiched between the fitting nose (seat) and the sleeve. … This creates a very effective seal between the fitting nose and tube flare, or hose.
How do you measure an O-ring for boss fittings?
What is an orb fitting?
What are ORB Fittings? ORB, or (SAE Straight Thread O-ring Boss) fittings, incorporate a port connection as recommended by the National Fire Protection Association (N.F.P.A.) for leak prevention in medium and high pressure hydraulic systems. … The male connection is a straight UNF thread with an O-ring.
Is there metric Orb?
What does an fittings stand for?
Historical Context of the AN Fitting AN stands for Air Force – Navy Aeronautical Design Standards (also known as “Army Navy”) that are used in U.S. Military aviation applications. These fittings are made to meet strict performance standards related to the aeronautical industry.
What is a 45 degree flare?
SAE 45° Fittings Flare fittings are a type of compression fitting used with metal tubing, usually soft steel and ductile (soft) copper, though other materials are also used. … The most common flare fitting standards in use today are the 45-degree SAE style, and the 37-degree AN style, also used with the JIC system.
What is a 45 degree flare used for?
Brass SAE 45° Flare Fittings, & 37° Flare – 900 Brass SAE 45° fittings are designed for use on low pressure copper, brass, aluminum or steel tubing. They are most commonly used for fuel equipment, plumbing, gases, refrigeration and vacuum lines.
Do you use Teflon tape on JIC fittings?
JIC fittings don’t use any tape. Only NPT fittings use tape, and a lot of times they don’t need it.
Is Blue permatex the same as blue Loctite?
The Loctite Heavy Duty 242 Blue Threadlocker is actually identical to the Permatex 24200. Totally interchangeable.
What does JIS stand for in fittings?
JIS stands for Japanese Industrial Standard and is used for threads on hydraulic fittings.
Is Jif a scrabble word?
jif is an acceptable dictionary word for games like scrabble, words with friends, crossword, etc.
Is Jil a scrabble word?
jil is an acceptable dictionary word for games like scrabble, words with friends, crossword, etc.
Is Vic a scrabble word?
No, vic is not in the scrabble dictionary.
Why are an fittings red and blue?
It is a US military-derived specification that dates back to World War II and stems from a joint standard agreed upon by the Army and Navy, hence AN. The Army-Navy involvement is also the origin of the red/blue color combination that was traditionally used in the anodized finishing process.
What thread is AN4?
1/4-28 UNF AN4 bolts have a 1/4-28 UNF thread. All sizes of AN4 bolts have a 0.469 inch thread length (except AN4-3A, which has 0.406 inch thread length).
How do you measure your size?
Choosing Your Size
- BUST:Measure around the back, under the arms and across the fullest part of the bust. …
- WAIST: Measure around the waist, with the tape measure flat against the figure and snug but not too tight.
- HIPS: Measure over the fullest part of the hips, usually 21-23cm / 8-9” down from the waist.
What does JIC mean in hydraulics?
Joint Industry Council JIC (or Joint Industry Council) fittings, defined by SAE J514, are compression fittings machined with a 37 degree flare seating surface and parallel threads. They are commonly manufactured in nickel alloys, brass, carbon & stainless steel. JIC Fitting hydraulic connections are common in most fluid power systems.
How do you identify a fluid port and connector?
Most fluid pipe and tube sizes in the United States are identified by dash numbers, abbreviations that make ordering components easier. Dash numbers are commonly expressed as the numerator of a fraction where the denominator is always 16. For example, a -04 port or connector is 4/16 or 1/4 inch.
How do you size an fitting?
AN sizes range from -2 (dash two) to -32 in irregular steps, with each step equating to the OD (outside diameter) of the tubing in 1/16″ increments. Therefore, a -8 AN size would be equal to 1/2″ OD tube (8 × 1/16 = 1/2).
What is flare seat?
Does JIC fit NPT?
JIC hydraulic fittings is used in high pressure system, NPT fittings is used in low-pressure system. NPT pipe threads have always been popular, as leaks can be fixed by simply tightening the fitting. NPT is often used to connect port, hydraulic adapter has a combination from JIC to NPT end fittings.
Graduated from ENSAT (national agronomic school of Toulouse) in plant sciences in 2018, I pursued a CIFRE doctorate under contract with Sun’Agri and INRAE in Avignon between 2019 and 2022. My thesis aimed to study dynamic agrivoltaic systems, in my case in arboriculture. I love to write and share science related Stuff Here on my Website. I am currently continuing at Sun’Agri as an R&D engineer.