If the smallest socket you can fit over your 7-spline nut is 17mm or 11/16 then you need the Medium 7-Spline Key. If the smallest socket you can fit over your 7-spline nut is either 3/4 12-point or 19mm, 13/16 (either Hex or 12-point), then you need the Large 7-Spline Key.
Are all spline keys the same?
Since there are different sizes of keys available in the 7-spline family, it is important to get keys that match the specifications or your lug nuts.
Are spline lug nuts safe?
This is not even slightly true. The spline drive key is never a unique pattern, and are easily available from any auto parts store. Relying on spline drive lugs for theft protection is no protection at all.
How do you use a spline lug nut key?
Are all spline lug nuts the same size?
To our knowledge, there are only two sizes of 6-Spline nuts (with symmetrical or evenly spaced splines). If your 17mm, 18mm, 19mm, 11/16 or 3/4 socket (either Hex or 12-point) fits over your 6-Spline Nut, then you need the Small 6-Spline Key.
How do you remove a 7 Spline lug nut?
How do I get a replacement wheel lock key?
How do you install spline lug nuts?
What do you do if you lost your lug nut key?
One option is to call your mechanic or any local auto repair shop. Many mechanics have special tools (sockets) for this purpose, so they might be able to remove the wheel locks without a key. In some cars it’s fairly easy, in others it’s difficult. They might need the help of a hammer and penetrating oil.
Can you spray wd40 on lug nuts?
WD-40 should not be used on lug nuts whether to try to remove them or to clean off rust. By applying oil, grease, or an anti-seize preparation to the threads, you run the risk of over-torquing them when you tighten up your wheels. WD-40 tends to be more of a band-aid fix than anything.
Do spline lug nuts prevent theft?
Should you put anti seize on lug nuts?
But experts tell us not to use any lubricant, including anti-seize compound, on wheel studs or nuts. The tech folks at Tire Rack state: Torque specifications are for dry threads only. The fastener threads should be free of oil, dirt, grit, corrosion, etc. It is important NOT to lubricate hardware threads or seats.
What is a spline key?
Splines are ridges or teeth on a drive shaft that mesh with grooves in a mating piece and transfer torque to it, maintaining the angular correspondence between them. … An alternative to splines is a keyway and key, though splines provide a longer fatigue life, and can carry significantly greater torques for the size.
What are spline drive lug nuts?
SplineDrive lug nuts offer a closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they’re 30% lighter in weight. SplineDrive lug nuts take safety, dependability and good looks to the next level.
What is spline key?
Abstract. Splines and keys are machinery components placed at the interface between shafts and hubs of power-transmitting elements. A spline (or key) is usually machined (or attached) onto the shaft of a power-transmitting pair, and the corresponding groove is cut into the hub.
Can I use aftermarket lug nuts on stock wheels?
Aftermarket lug nuts are made for every type of wheel available. As long as you get the proper lug nuts there is no safety issue. The problem comes when you try to use the incorrect lug nut on any type of wheel, aftermarket or OEM. As long as it’s a good quality part of the correct type than you will be fine.
Are lug nut threads universal?
There isn’t one universal lug nut size that is used in all cars. There are lug nuts that have different thread sizes than others. There are also lug nuts that have different thread pitches than others.
How do I know my lug nut size?
Check the thread size for a lug nut. Refer to the vehicle owner’s manual for thread dimensions; measure the width of threads on the lug bolt with measuring tape, or bring the nut to a hardware store and twist it around the thread pitch gauge or compare it to loose bolts with marked sizes.
Where is wheel lock key located?
The key usually comes in a set which can be found with the spare tire or sometimes in the glove box. If the key is lost or gets broken somehow, the dealer or manufacturer can make a new one. It’s a good idea to always make sure that you get your wheel lock key back whenever your wheels are removed.
How do you get a wheel lock off without the key?
How do I remove a stripped spline lug nut?
Can I buy a new lug nut key?
Purchase a new key. This is sometimes the easiest option although it can sometimes be expensive. However if you’d like to use the original locking wheel nut set you’ll need to buy a new locking wheel nut key. Each key comes with a code so you can order a replacement from the vehicle manufacturer.
Are Wheellocks necessary?
Are Wheel Locks Necessary? For most drivers, wheel locks are unnecessary and will likely cause you more harm than good. However, you might benefit from wheel locks in a small variety of situations, including: If you live in an area where tire, rim, or wheel theft is common.
How do you remove a broken lug nut lock?
What is a spline drive socket?
A spline socket is designed to tighten and un-tighten spline fasteners but is also ideal for use on 4-point, 6-point (hex) and 12-point (bi-hex) fasteners, making them a useful socket to use across multiple shaped fasteners.
How do you use a wheel lock key?
What is a tuner lug?
How do you remove Gorilla lug nuts without the key?
How do you unlock a lug nut with a key?
Method 1 of 2: Remove your wheel locks with a wheel lock key
- Materials Needed. …
- Step 1: Make sure your vehicle is in park. …
- Step 2: Align the key with the nut. …
- Step 3: Place your lug nut wrench on the wheel lock key. …
- Step 4: Turn the lug nut wrench counterclockwise. …
- Step 5: Turn the wheel lock off by hand. …
- Materials Needed.
Graduated from ENSAT (national agronomic school of Toulouse) in plant sciences in 2018, I pursued a CIFRE doctorate under contract with Sun’Agri and INRAE in Avignon between 2019 and 2022. My thesis aimed to study dynamic agrivoltaic systems, in my case in arboriculture. I love to write and share science related Stuff Here on my Website. I am currently continuing at Sun’Agri as an R&D engineer.